Thermodynamic analysis of the energy recovery from the aerobic bioconversion of solid urban waste organic fraction

Waste management is of the utmost importance for many countries and especially for highly developed ones due to its implications on society. In particular, proper treatment before disposal of the solid urban waste organic fraction is one of the main issues that is addressed in waste management. In fact, the organic fraction is particularly reactive and if disposed in sanitary landfills without previous adequate treatment, a large amount of dangerous and polluting gaseous, liquid and solid substances can be produced. Some waste treatment processes can also present an opportunity to produce other by-products like energy, recycled materials and other products with both economic and environmental benefits. In this paper, the aerobic treatment of the organic fraction of solid urban waste, performed in a biocell plant with the possibility of recovering heat for civil or industrial needs, was examined from the thermodynamic point of view. A theoretical model was proposed both for the biological process of the organic fraction, as well as for the heat recovery system. The most significant results are represented and discussed.     

Shadows and lights of GSCM (Green Supply Chain Management): determinants and effects of these practices based on a multi-national study

Green Supply Chain Management (GSCM) is an increasingly widely-diffused practice among companies that are seeking to improve their environmental performance. The motivation for the introduction of GSCM may be ethical (e.g., reflecting the values of managers) and/or commercial (e.g., gaining a possible competitive advantage by signalling environmental concern). Drawing upon a database of over 4000 manufacturing facilities in seven OECD countries this paper assesses the determinants and motivations for the implementation of GSCM. We find that GSCM is strongly complementary with other advanced management practices, and that it contributes to improved environmental performance. The effects on commercial performance are more ambiguous.     

Serum levels of PCDDs, PCDFs and PCBs in non-occupationally exposed population groups living near two incineration plants in Tuscany, Italy

A pilot study was carried out in Tuscany, Italy, to provide preliminary information on the concentrations of polychlorinated dibenzodioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorobiphenyls (DL-PCBs), and selected non-dioxin-like PCBs (NDL-PCBs) in groups of subjects living in the vicinity of two incineration plants. Seventy-four volunteers were enrolled from areas identified as under a potential impact from incinerator emissions and from not exposed areas. No significant differences were observed between subjects living in the two types of areas. Total concentrations of PCDDs, PCDFs, and DL-PCBs resulted to be in the range 23-30 pg WHO-TEQ g(-1), lipid base, for subjects in the 27-54 year age groups, while concentrations increased to 40-44 pgTEQ g(-1) for the two 55-67 year age groups. The levels of PCDDs and PCDFs were in good agreement with those observed for unexposed population groups in Italy, while the contribution to total TEQ from DL-PCBs was appreciably higher than those currently observed in the general population in Italy and other countries. As to NDL-PCBs, serum levels of the six "indicator" congeners were in the range 240-300 ng g(-1), lipid base, for subjects in the 27-54 year age groups. A raise in NDL-PCB body burden (430-470 ng g(-1), lipid base) was observed for the two 55+ year age groups, in agreement with the expected age-dependent increase. The findings from this study do not show an incremental exposure to PCDDs and PCDFs in the samples from subjects living around the two incineration plants, whereas PCB congener profiles in all samples suggest a possible impact on the area of interest of industrial activities from near industrial settlements.     

Multicriteria Decision Aid in Supporting Decisions Related to Groundwater Protection

In the recent decades, there have been frequent conflicts between groundwater resources and environmentally hazardous activities. An example is the construction of the new highway through the important glaciofluvial esker aquifer Nybroåsen, which passes the protection zone of the water supply for the Kalmar municipality, in the southeastern part of Sweden. The decision to build the new road through this important aquifer has been strongly questioned by the municipality and the public because the value of the water resources in Nybroåsen was not taken into consideration during the first phase of the decision-making process. Multicriteria decision aid (MCDA) is applied as a tool to structure and analyze the four road alternatives proposed in the environmental impact assessment for the above conflict. The alternatives, including the existing road, are in conflict with water resources, agriculture, natural, and cultural values. The impacts on the water resources have been predicted by a two-dimensional physically based time-variant flow and solute groundwater model, which has been calibrated and evaluated. The MCDA illustrates how it can be used to identify (1) actors and their concerns, (2) ranking of alternative road scenarios according to actors preferences, and (3) coalition groups of actors, i.e., groups that have similar views with regard to the road alternatives. The analysis shows that the two best compromise solutions obtained in the MCDA were unacceptable by the strongest coalition group, showing that either the family of criteria was not well chosen or new alternatives should have been developed.     

Organochlorine pesticides,PCBs and heavy metals in tissues of the mullet Liza aurata in lake Ganzirri and Straits of Messina (Sicily,Italy)

The aim of this research was to investigate the presence of organochlorine pesticides, PCBs and heavy metals (Cd, Cr, Cu, Ni, Pb and Zn) in fish living in lake Ganzirri and the Straits of Messina, using the mullet Liza aurata as a "biological indicator". Different tissues of Liza aurata, which include the muscle, gill and vertebral column, were taken for analyses. Quantitative determination of the organochlorine compounds was performed by GC-ECD and confirmed with GC-MS. The concentrations of "essential" and "toxic" heavy metals were determined by Atomic Absorption Spectrophotometry. For the mullets of lake Ganzirri, the study showed DDE in three samples of gills and one of muscle, at concentrations below the MRL; no appreciable residues of PCBs (Aroclor 1232 series) were found. The concentrations of Zn and Cu were much higher than those of the "toxic" metals. No traces of organochlorine pesticides and PCBs were found in the individuals from the Straits of Messina. Therefore, these results indicate that these two environments are not at toxicological risk.     

Traffic-related platinum and rhodium concentrations in the atmosphere of Rome

Platinum and Rh content in the atmosphere of Rome as released by car catalytic converters was monitored from 1998 to 2000 in six urban sites with different traffic intensities and in one rural area. Samples collected with medium-volume PM10 samplers were analyzed by Sector Field Inductively Coupled Plasma Mass Spectrometry (SF-ICP-MS). The Pt content varied from 2.4 to 60.1 pg m(-3) (mean value 17.8 pg m(-3)) at the urban locations whilst that of Rh spanned the range 0.8-9.4 pg m(-3) (average value 4.0 pg m(-3)). The rural area showed metal levels mostly below the limits of detection, pointing to automobile traffic as the main source of those elements in the urban atmosphere. The highest mean concentrations of Pt and Rh, ie. 22.2 and 5.0 pg m(-3), were detected along the ring road where the traffic density is high (>100,000 vehicles per day) and the driving speed between 100 and 120 km h(-1). The lowest Pt and Rh mean concentrations, i.e. 11.4 and 3.4 pg m(-3), were measured downtown, where traffic density is lower (20,000 vehicles per day) and the driving speed is limited (50 km h(-1)). Significant concentrations of Pt and Rh were found in the vicinity of traffic signals, indicating that the "stop-and-go" conditions might also affect their release. The measured Pt/Rh ratio spanned the range 3.3-5.9 in accordance with that present in the more commonly used gasoline car catalytic converters. Seasonal variations between wintertime (with Pt and Rh mean concentrations of 23.8 and 5.1 pg m(-3), respectively) and summertime (with Pt and Rh mean concentrations of 14.1 and 3.3 pg m(-3), respectively) were also observed.     

Chrysotile asbestos is progressively converted into a non-fibrous amorphous material by the chelating action of lichen metabolites

A natural deactivation of chrysotile asbestos occurs on serpentinite rocks where lichens selectively grow on the fibres and secrete metabolites, including oxalic acid, which, in the long term, turn the fibres into a non-toxic amorphous material.     

Survey on fluoride, bromide and chloride contents in public drinking water supplies in Sicily (Italy)

Six hundred and sixty-seven water samples were collected from public drinking water supplies in Sicily and analysed for electric conductivity and for their Cl(-), Br(-) and F(-) contents. The samples were, as far as possible, collected evenly over the entire territory with an average sampling density of about one sample for every 7,600 inhabitants. The contents of Cl(-) and Br(-), ranging between 5.53 and 1,302 mg/l and between <0.025 and 4.76 mg/l respectively, correlated well with the electric conductivity, a parameter used as a proxy for water salinity. The highest values were found both along the NW and SE coasts, which we attributed to seawater contamination, and in the central part of Sicily, which we attributed to evaporitic rock dissolution. The fluoride concentrations ranged from 0.023 to 3.28 mg/l, while the highest values (only three exceeding the maximum admissible concentration of 1.5 mg/l) generally correlated either with the presence in the area of crystalline (volcanic or metamorphic) or evaporitic rocks or with contamination from hydrothermal activity. Apart from these limited cases of exceeding F(-) levels, the waters of public drinking water supplies in Sicily can be considered safe for human consumption for the analysed parameters. Some limited concern could arise from the intake of bromide-rich waters (about 3% exceeding 1 mg/l) because of the potential formation of dangerous disinfection by-products.     

Rotavirus Occurrence in Shellfish with Low Levels of E. coli

The purpose of this study was to evaluate “in field” the accumulation of virus in shellfish and compare it with the concentration of bacterial indicators. Individuals of Mytilus galloprovincialis were placed in two sampling station located in a contaminated coastal bay and in one control station located one kilometer offshore. The presence of Rotavirus and E. coli was assessed weekly both in seawater and in shellfish samples. The Rotavirus genome was detected in water, preliminarily concentrated by tangential flow ultrafiltration method, and in hepatopancreas of mussels by Real-Time PCR. E. coli was enumerated in water matrices by a filtering method and in mussels by the MPN method. Rotaviruses were not recorded in seawater, while in mussels they were detected since third week after placement. E. coli in mussels were always below the limits set in the Regulation (EC) 854/2004. This study suggests the need for a viral indicator to insure the safety for consumption of shellfish.     

Postconsumer polyethylene terephthalate (PET)/polyolefin blends through reactive processing

Increasing awareness of environmental and energy problems has promoted greater governmental interest in selected waste collection and consequently has attracted the interest of several research groups to the challenge of converting recovered plastics into useful materials. The reactive blending of postconsumer polyethylene terephthalate (PET) with different polyolefins (PO) was studied in attempts to obtain a new material with enhanced properties with respect to the starting materials. The success of the project depends mainly on the possibility of obtaining a compatibilized blend between two starting polymers that, from chemical and thermomechanical viewpoints, are very different. This was approached by employing polyolefins bearing functional groups capable of specific interaction or chemical reaction with PET end groups. Ternary blends of very low density polyethylene (VLDPE)/PET/functionalized polyolefin (FPO) in a weight composition of 70/20/10 and binary blends of FPO/PET in a weight composition of 90/10 were prepared and studied to obtain reinforced polyolefin thermoplastic materials. Reactive blending was achieved in a Brabender Plastograph with a mixing chamber of 30 or 50cm³, at 250°C, and 40rpm for 10min. Differential scanning calorimetry, scanning electron microscopy, and tensile tests were used to investigate the phase behavior, the efficiency of compatibilization, and the mechanical properties of the blends.